Command Syntax - Cisco Small Business 200 Series User Manual

Using the Command Line Interface

Command Syntax

Command Syntax
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
A command is one or more words that might include one or more parameters.
Parameters might be required or optional values.
Some commands, such as
Other commands, such as
command. You must type the parameter values in a specific order. Optional
parameters follow required parameters. The following example describes the
command syntax:
network parms
network parms ip-address netmask
• is the command name.
network parms
• and
ip-address netmask
the actual value.
• is an optional parameter that you can replace with text.
gateway
This reference lists each command by the command name and provides the
following information where applicable:
• Syntax Descriptions—describes each keyword and parameter.
• Defaults—describe any default values for the command parameters.
• Command Modes—identifies the CLI command modes in which you can
execute the command.
• Examples—one or more examples of the command string, the output, and
descriptions of the output fields, if applicable.
• Related Commands—other commands you can use in conjunction with the
primary command.
or
show network clear vlan
, require that you supply a value after the
network parms
[ ]
gateway
are mandatory parameters that you must replace with
, do not require parameters.
1
15