Storm-Control Multicast Rate - Cisco Small Business 200 Series User Manual

Port Management
Flow Control and Storm Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
storm-control
multicast level
show storm-
control

storm-control multicast rate

This command enables and configures the multicast storm recovery threshold for
an interface or all interfaces as packets per second. If multicast storm recovery is
active, and if the rate of Layer 2 broadcast traffic ingressing on an interface
increases beyond the configured threshold, the traffic is dropped.
Use the no form of command to remove the rate threshold. In Global Config mode
the same rate is set on all ports.
storm-control multicast rate 0-14880000
no storm-control multicast rate
Syntax Descriptions
Parameter
0–14880000
Default
No rate is configured.
Command Modes
Interface Config
Global Config
Description
Configures the multicast storm recovery threshold for an
interface or all interfaces.
Shows storm control configuration on a port or on all ports.
Description
The multicast traffic rate, in number of packets per second,
above which traffic will be dropped.
3
193