Switchport Mode - Cisco Small Business 200 Series User Manual

VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
switchport trunk
native-vlan
show interfaces
switchport

switchport mode

Use this command to configure the VLAN membership mode of a port. To reset
the mode to the appropriate default for the switch, use the no form of this
command.
switchport mode {access | trunk | general}
no switchport mode
Syntax Descriptions
Parameter
access
Description
Configures the VLAN ID of the native VLAN for the port.
Displays the switchport configuration.
Description
An access port is a member of only one VLAN and its PVID
is set to that VLAN ID. The port Accept Frame Type is set
to Accept Only Untagged and Priority Tagged frames. An
access port only egresses untagged packets.
4
224