Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
clock timezone
show clock
clock summer-time
Use this command to enable daylight savings time (DST). Use the no form of the
command to remove the DST configuration.
clock summer-time
no clock summer-time
Default
DST is not configured by default.
Command Modes
Global Config
Related Commands
Command
clock
summertime date
show clock
clock summertime date
Use this command to set the summertime offset to the UTC. Use the no form of the
command to delete the summertime configuration.
clock summer-time date start-date start-month start-year start-minutes end-date end-
month} end-year end-minutes [offset offset] [zone acronym]
no clock summer-time
Description
Sets the offset to Coordinated Universal Time (UTC).
Displays the time and date from the system clock.
Description
Sets the summertime offset from the universal
coordinated time (UTC).
Displays the time and date from the system clock.
2
99