Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
spanning-tree mode
Use this command to configure the spanning tree protocol. To return to the default
configuration, use the no form of this command.
spanning tree mode {stp | rstp | mstp}
no spanning tree mode
Syntax Descriptions
Parameter
stp
rstp
mstp
Default
Rapid Spanning Tree Protocol (RSTP) is enabled.
Command Modes
Global Config
Related Commands
Command
show spanning-
tree
show spanning-
tree brief
spanning-tree mst
Use this command to set the Path Cost or Port Priority for the specified port within
the multiple spanning tree instances or in the common and internal spanning tree.
Use the no form of this command to reset these values to their defaults.
spanning-tree mst mstid {{cost 1-200000000 | auto} | {external-cost 1- 200000000 |
auto} | port-priority 0-240}
Description
Configures common Spanning Tree mode.
Configures Rapid Spanning Tree mode.
Configures Multiple Spanning Tree mode.
Description
Displays spanning tree settings for the common and internal
spanning tree.
Displays spanning tree settings for the bridge.
5
267