Radius Server Key - Cisco Small Business 200 Series User Manual

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

radius server key

Use this command to configure the key to be used in RADIUS client
communication with the specified server. The IP address or hostname provided
must match a previously configured server. When this command is executed, the
secret is prompted.
You can enter the RADIUS password in encrypted and non-encrypted format.
When you save the configuration, these secret keys are stored in encrypted
format only. To enter the key in encrypted format, use the encrypted keyword.
radius server key {ip-address | dnsname} [encrypted password
Syntax Descriptions
Parameter
ip-address
dnsname
encrypted
password
Command Modes
Global Config
Examples
The following example configures a key without encryption.
(switch) (Config)#radius server key 10.172.69.32
Enter secret (16 characters max):******
Re-enter secret:******
Description
The IP address of the RADIUS server.
The hostname of the RADIUS server. To specify a
hostname, ensure that the DNS client capability is
configured on the switch.
Enables entering an already-encrypted key in hexadecimal
format.
The key for communicating with this server. In non-
encrypted format, the key must be an alphanumeric value
not exceeding 16 characters. In ecrypted format, the key
must be a 128-character hexadecimal value.
8
]
331