Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
show sntp client
sntp client mode
Use this command to enable Simple Network Time Protocol (SNTP) client mode
and set the mode to either broadcast or unicast. Use the no form of the command
to disable SNTP client functionality.
sntp client mode {broadcast | unicast}
no sntp client mode
Syntax Descriptions
Parameter
broadcast
unicast
Default
The switch is not configured as an SNTP broadcast or unicast client.
Command Modes
Global Config
Usage Guidelines
Use the command without the optional keywords broadcast or unicast to enable
the SNTP client without specifying a mode.
Related Commands
Command
sntp server
show sntp
Description
Displays SNTP client settings.
Description
Configures the switch to obtain its time settings from
SNTP broadcast servers.
Configures the switch to obtain its time settings from
SNTP unicast servers.
Description
Configures SNTP unicast servers.
Displays SNTP settings and status.
2
108