Show Snmp; Snmp-Server Engineid Local - Cisco Small Business 200 Series User Manual

SNMP
(Switch) #show snmp
SNMP server disabled
Community-String
--------------------
community1
Traps are enabled.
Version 1,2 notifications
Target Address
----------------
Version 3 notifications
Target Address Type
-------------- -------
192.168.100.55 Trap
=====================================================================================
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command

show snmp

details
show snmp
This command displays SNMP client and community details.
show snmp
Command Modes
Privileged EXEC
Examples
The following shows sample output for the command.
Community-Access
----------------
Read/Write
Type Community
------- -------------- -------
Username
----------------- -------
admin

snmp-server engineID local

Use this command to specify the Simple Network Management Protocol (SNMP)
engine ID on the switch. Use the no form of this command to reset the engine ID to
a default value that is created automatically from the switch MAC address.
snmp-server engineID local engineid-string
no snmp-server engineID local
Description
Displays the SNMP client and community details.
Version UDP
Port
------
Security UDP
Level Port
------
NoAuth-N 162
IP Address
----------------
10.131.11.12
TO Retries
Sec
--- -----
TO Retries
Sec
--- -----
15 3
11
420