Snmp-Server Enable Traps Linkmode - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
SNMP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Default
These traps are enabled.
Command Modes
Global Config
Related Commands
Command
show trapflags
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled,
link traps are sent only if the Link Trap flag setting associated with the port is
enabled. Use the no form of the command to disable it.
snmp-server enable traps linkmode
no snmp-server enable traps linkmode
Default
These traps are enabled.
Command Modes
Global Config
Related Commands
Command
show trapflags
Description
Displays trap conditions.
Description
Displays trap conditions.
11
417
Advertisement
Table of Contents
