Network Protocol - Cisco Small Business 200 Series User Manual

IP Configuration
IP Addresses
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command Modes
Privileged Exec
Related Commands
Command
show network

network protocol

Use this command to specify the network configuration protocol to be used. If you
modify this value, change is effective immediately. If you use the bootp parameter,
the switch periodically sends requests to a BOOTP server until a response is
received. If you use the dhcp parameter, the switch periodically sends requests to
a DHCP server until a response is received. If you use the none parameter, you
must configure the network information for the switch manually.
network protocol {none | bootp | dhcp}
Syntax Descriptions
Parameter
none
bootp
dhcp
Default
DHCP is enabled.
Command Modes
Privileged Exec
Description
Displays the configuration settings associated with the
switch management interface.
Description
Disables DHCP and BOOTP. If none is specified, you can
use the network parms command to configure IP
information for the switch.
Enables BOOTP.
Enables DHCP.
10
396