Show Port-Channel System Priority - Cisco Small Business 200 Series User Manual

Port Management
Link Aggregation
(Switch) #show port-channel brief
Logical Port-Channel Name Link State
Interface
--------- ----------------- ---------- -------- ------- --------- ------------
ch1 lag1
ch2 lag2
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following command shows information for all LAGs.
Down
Down
Logical Intf
Port-Channel
Name
Link State
Trap Flag
Type
Mbr Ports
Active Ports
Related Commands
Command
show port
channel

show port-channel system priority

Use this command to display the LAG system priority.
show port-channel system priority
Trap Type
Flag
Enabled Dynamic e2 , e3
Enabled Static e4
The port name.
The LAG name.
Indicates whether the LAG is up or down.
Indicates whether a trap is generated when the Link State
changes.
Indicates whether the LAG is a dynamic or static LAG.
The ports that are members of the LAG, whether or not
they are currently active in the LAG.
The ports that are active ports on the LAG.
Description
Displays an overview of all port-channels (LAGs) on the
switch.
Mbr Ports ActivePorts
3
215