Show Auto-Voip Protocol-Based Interface - Cisco Small Business 200 Series User Manual

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Examples
The following example shows command output.
(switch) #show auto-voip oui-table
OUI Status
--------- ----------
00:01:E3 Default
00:03:6B Default
00:12:43 Default
00:0F:E2 Default
00:60:B9 Default
00:D0:1E Default
00:E0:75 Default
00:E0:BB Default
00:04:0D Default
00:1B:4F Default
AA:BB:CC Configured
Related Commands
Command
auto-voip oui
show auto-voip
oui-based
interface
show auto-voip
oui-based
interface

show auto-voip protocol-based interface

Use this command to display the profile-based VoIP settings for an interface or for
all switch interfaces.
show auto-voip protocol-based interface {interface | all}
Syntax Descriptions
Parameter
interface
Description
---------
SIEMENS
CISCO1
CISCO2
H3C
NITSUKO
PINTEL
VERILINK
3COM
AVAYA1
AVAYA2
signalTel
Description
Configures a new OUI.
Displays the VoIP profile settings for the specified VoIP
type on an interface or on all switch interfaces.
Displays the Auto VoIP configuration of an interface or all
interfaces.
Description
Shows Auto VoIP information for the specified port.
4
250