Auto-Voip Oui-Priority - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Administration manual (202 pages)
Table of Contents
Advertisement
VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
auto-voip oui-vlan
show auto-voip
oui-based
auto-voip oui-priority
Use this command to configure the class-of-service priority assigned to OUI-
based VoIP traffic. Use the no form of the command to reset the priority to the
default, the highest priority queue available on the system.
auto-voip oui-priority priority
no auto-voip oui-priority
Syntax Descriptions
Parameter
priority
Default
The highest priority queue available in the system.
Command Modes
Global Config
Related Commands
Command
auto-voip oui-
based
auto-voip oui-
based all
Description
Configures the VLAN to be assigned to OUI-based VoIP
traffic.
Displays the VoIP Profile settings on the interface or
interfaces.
Description
A class of service priority level to assign to OUI-based
VoIP packets. The range is 0-7, with 0 being the highest
priority.
Description
Enables the VoIP Profile on an interface.
Enables the VoIP Profile on all the interfaces of the switch.
4
245
Advertisement
Table of Contents
