Set Multicast Filter-Unregistered - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
mac-address
ip-address
vlan-id
Command Modes
Global Config
Related Commands
Command
macfilter adddest
macfilter
show mac-
address-table
staticfiltering

set multicast filter-unregistered

Use this command to drop unregistered-multicast-addresses on a port in a VLAN.
Use the no form of this command to return to the default.
set multicast filter-unregistered {
no set multicast filter-unregistered {
Syntax Descriptions
Parameter
vlan-id
Description
The multicast MAC address, specified as a 6-byte
hexadecimal number in b1:b2:b3:b4:b5:b6 format.
An IPv4 address.
A valid VLAN.
Description
Adds the port to the destination filter set for the MAC filter
with the given MAC address or IP address and VLAN ID.
Adds a static filter entry with MAC-layer station source
address or IP Group Address.
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.
[
vlan vlan-id
[
vlan vlan-id
Description
The ID of the VLAN to configure.
]
| all}
]
| all}
7
296