Show Interface Counters - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
Parameters Definition
Collisions Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were
Counters Last last cleared.
Cleared
The display parameters, when the argument is switchport are as follows:
Term Definition
Packets Received The total number of packets (including broadcast packets and multicast packets) received by
Without Error the processor.
Broadcast The total number of packets received that were directed to the broadcast address. Note that
Packets Received this does not include multicast packets.
Packets Received The number of inbound packets that contained errors preventing them from being
With Error deliverable to a higher-layer protocol.
Packets The total number of packets transmitted out of the interface.
Transmitted
Without Error
Broadcast The total number of packets that higher-level protocols requested to be transmitted to the
Packets Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit Packet The number of outbound packets that could not be transmitted because of errors.
Errors
Address Entries The total number of Forwarding Database Address table entries now active on the switch,
Currently In Use including learned and static entries.
VLAN Entries The number of VLAN entries presently occupying the VLAN table.
Currently In Use
Time Since The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
Counters Last were last cleared.
Cleared

show interface counters

This command reports key summary statistics for all ports (physical, CPU, and port-channel).
Format
show interface counters
Mode Privileged EXEC
Utility Commands
372