Lucent Technologies DEFINITY User Manual page 88

Console Operations
n
n
4. Initiate the outbound call by clicking the Trunk Group button that is
associated with the desired trunk, or by dialing the access code for the
desired trunk.
n
5. Click the Transfer icon
n
6. If you want to set up a 3-way connection that includes the
console, click the Split feature button before or after the called party
has answered. The Split feature button changes to gray and you are
connected to both the caller and the calling party. If you want to drop
out of the 3-way connection, click the Transfer icon
F6. This procedure is complete.
7. If you want to transfer the call but not announce it, click the
Transfer icon
answers. The call is transferred, the Split feature button changes to
gray, and the console is released from the call. This procedure is
complete.
8.
it, wait until the called party answers, then speak to the person to
notify them of an incoming call.
5-16
Issue 2.5 October 1999
The background of the call bar changes to white.
The call bar assigns a letter identification (such as c= ) to the new
call.
The Transfer and Cancel
call bar that is associated with this call.
This procedure is complete.
again or press F6 before the called party
NOTE:
You can perform this step only if Auto Transfer is not enabled. If
Auto Transfer is enabled, the call is transferred automatically.
If you want to transfer the call after announcing
NOTE:
You can perform this step only if Auto Transfer is not enabled. If
Auto Transfer is enabled, the call is transferred automatically.
icons are displayed on the
or press F6.
or press