Importing An Upload File - A Quick Overview - Lucent Technologies DEFINITY User Manual

Directory Administration
Importing an Upload File — A Quick
Overview
The PhoneLine MasterDirectory User' s Guide contains the step-by-step
procedures you will follow to import an Upload file. For your convenience,
however, a synopsis of those instructions is provided here.
To import an Upload File:
1. Access the console administration area and perform the procedure to
upload the switch' s Integrated Directory to the Upload File. (Refer to
Chapter 3, " Console Administration" for the step-by-step procedures.)
2. Exit the console administration area.
3. Launch MasterDirectory.
4. Select File-Open from the Menu Bar.
5. Locate and click on the file named dir1.md. Its default location is
pccon2\direc\.
6. Click OK or press ENTER.
7. Select Import-Map-Open from the Menu Bar.
8. Locate and click on the file named upload.imp. Its default location is
pccon2\direc\.
9. Click OK or press ENTER.
10. To identify the source file, locate and click on the file named
upload.dbf.
11. Click Next.
12. If there are any errors in the displayed import map, correct those
errors now.
13. Click Next.
14. To begin the import process, click Import.
n
15. Click OK.
16. Click Close.
17. Exit MasterDirectory.
4-4
Issue 2.5 October 1999
The import process begins. When it is complete, a confirmation
box is displayed.