Installation
Installing the PC Console Software
To install the PC Console software:
1. Insert the PC Console CD in the CD-ROM drive. (The instructions
in this section assume that you are using drive d. If this is not the
case, substitute d with the appropriate drive letter.)
2. Access your Desktop or the Program Manager screen.
3. Select Start-Run or File-Run.
n
4. Type d:setup
5. Click OK.
n
6. Click Next.
n
7. If you want to install the PC Console software to a directory other
than the indicated default, or you want to install it onto a LAN
server, select that location now.
1-18
Issue 2.5 October 1999
The Run dialog box is displayed.
The Welcome screen is displayed.
The Select Destination Directory dialog box is displayed.
NOTE:
The PC Console database files can be installed on your
network to allow file sharing with other console operators. If
you select this type of installation, also install and maintain a
local copy of the database information on the hard drive of
each PC that may require access to this information. In the
event of a LAN failure, PC Console will switch to the local
copy of the database information that allows it to place and
receive phone calls.
Under no circumstances should you try to install or run the file
named pccon2.exe off the LAN. This is the executable file for
the actual PC Console software. It is specifically designed for
a single user, and must reside on your local hard drive.