Lucent Technologies DEFINITY User Manual page 65

Console Administration
10. When you are finished making changes, click Save.
n
n
To update an existing custom language:
1. Click the Custom Language folder.
n
2. Click on the down-arrow next to the Name of custom language box.
Select the language you want to change.
3. If you want to change the language of the Help screens associated
with this custom language, click on the down-arrow next to the Help
box. Select the appropriate language for the Help screens.
4. Click the left arrow button near the bottom of the screen.
n
NOTE:
If necessary, you can use the left and right arrow buttons near
the bottom of the screen to cycle through the windows and
make any final changes to this interface language.
If all required information has been provided, and no duplication
exists for the ALT- key-sequences, the screen will display a status
bar message indicating that the language has been saved, and can
now be accessed within the PC Console system.
If any information is missing from the defined terms, or if a
duplicate exists within the ALT- key-sequence definitions, the
screen will instead display " Custom language will be incomplete."
Before you can use the new language, you must return to Step 5
and finish defining its terms and ALT- key-sequence definitions.
The Custom Language tab is displayed. This screen requires the
following information:
Name of custom language You must indicate which custom
language you are changing.
Help You must indicate which of the already-created Help
screens should automatically be associated with this language.
It is not possible to create a new language for the Help
screens.
The Miscellaneous Terms window is displayed. The terms
previously defined for this language are listed on the screen.
Issue 2.5 October 1999
3-19