Timing; Alerting Timer (Generic 3) - Lucent Technologies DEFINITY User Manual

Switch Features
2. Use the keyboard or the touch-tone buttons to enter the number (1
through 8) of the routing plan that should go into effect.
n
n
3. Click the Immediate Override feature button, or the Normal Mode
feature button.
n
n
To deactivate Immediate Manual Override:
1. Click the Immediate Override feature button.
n
n

Timing

Four timing features are available. They are grouped here for your
convenience.

Alerting Timer (Generic 3)

This feature terminates a held or unanswered call on a call bar when the call has
not been answered within a preset length of time (usually about 40 seconds).
When a held or unanswered call is not answered before the preset time period
expires, the associated call bar is displayed in red, and the attendant hears an
alerting tone.
6-46
Issue 2.5 October 1999
NOTE:
If you select any button other than 1 through 8, the
Immediate Manual Override attempt will be denied and the
display will return to Normal mode. If this occurs, return to
Step 1 to try again.
The Immediate Override feature button remains white.
The display is updated to show:
OLD ROUTE PLAN: x ENTER NEW PLAN: y
In the illustration above, " y" represents the number you just entered.
The Immediate Override feature button remains white.
Immediate Manual Override is in effect.
The Immediate Override feature button is displayed in gray.
Immediate Manual Override is deactivated, and the scheduled daily
routing plan goes into effect.