Lucent Technologies DEFINITY User Manual page 195

Glossary
Abbreviated Dialing
The switch feature that provides a
mechanism for storing and recalling
numbers used to place calls and
activate features. This feature reduces
the number of keystrokes required for
dialing.
AD feature buttons
The administered Abbreviated Dialing
feature buttons that allow one-button
dialing of selected numbers or access to
Abbreviated Dialing lists.
Administration Without Hardware (AWOH)
The switch feature that provides the
ability to administer station forms
without specifying a port location. Such
stations are referred to as " phantoms"
and do not generate alarms and errors
when the station is translated but not yet
installed.
Alarm Indicator
The indicator that appears on your
screen in the lower right corner when a
system problem is detected.
Alarm Reported Indicator
The indicator that appears on your
screen in the lower right corner that
indicates a detected system problem
was reported to the maintenance
organization.
Alerting Timer
The switch feature that terminates a
held or unanswered call on a call bar
when the call has not been answered
within a preset length of time (usually
about 40 seconds).
Attendant Auto-Manual Splitting
The feature that lets you temporarily
disconnect from a caller, place a call to
another party, and then connect the two
parties together.
Attendant Call Waiting
The switch feature that allows a call
extended from the console to a busy
single-line telephone inside the system
to wait at the called telephone.
Attendant Conference
The switch feature that allows the
attendant to arrange a conference call
with as many as five other conferees.
Attendant Control of Trunk Group Access
The switch feature that allows
attendants to control access to as many
as twelve trunk groups, loudspeaker
paging zones, or code calling zones per
console. Calls from system users to the
trunk group under attendant control
redirect to an attendant console.
Attendant Direct Trunk Group Selection
The switch feature that allows the
attendant to select a trunk group for an
outgoing call, loudspeaker paging zone,
or code calling zone by clicking a Trunk
Group button.
Attendant Display
The switch feature that shows call-
related, personal service, and message
information on the alphanumeric display
of the attendant console.
Attendant Intrusion
The switch feature that enables an
attendant to enter an existing call on
either a digital or analog station to offer
a new call or message to the called
party.
Attendant Lockout
The switch feature that prevents the
attendant from reentering a multi-party
call held on the console unless recalled
by a system user on the call.
Attendant Override of Diversion Features
The switch feature that allows you to
bypass any diversion features invoked
by and/or associated with a dialed
extension.
Attendant Priority Queue
The switch feature used to handle
incoming calls to the attendant group or
to an individual attendant when the call
cannot be immediately terminated to an
attendant.
Issue 2.5 October 1999 GL-1