Lucent Technologies DEFINITY User Manual page 52

Console Administration
2. Label each Hundreds Group button, just as it has been administered at
the switch.
The label you assign to each Hundreds Group button should reflect the
first digit (or group of digits) for the associated extensions. For
example:
n
n
3. When you are finished administering the Hundreds Group buttons,
click Save.
n
To label the feature buttons:
1. From the Button Identification area, click the button labeled Feature
Buttons.
n
3-6
Issue 2.5 October 1999
If your dialing plan has 3-digit extensions, you could conceivably
have 1000 extensions — 000 through 999. You would therefore
assign up to 10 Hundreds Group buttons at the switch, and
duplicate their assignments here. The first Hundreds Group button
would handle extensions 000 through 099. The second would
handle extensions 100 through 199, and so forth. The extensions
themselves would automatically be labeled within the grid that is
displayed to the attendant (000 through 099, and 100 through 199),
and the corresponding Hundreds Group button would be labeled
with the group' s prefix — in this example, 0 and 1.
If your dialing plan has 5-digit extensions, and you have 500
extensions — for example 10000 through 10499, you would assign
5 Hundreds Group buttons. The first Hundreds Group button would
handle extensions 10000 through 10099. The second would handle
extensions 10100 through 10199, and so forth. The extensions
themselves would automatically be labeled within the grid, and the
corresponding Hundreds Group button would be labeled with the
group' s prefix — in this example, 100 or 101.
NOTE:
Each button label can hold a maximum of three characters.
Your changes are saved.
Twenty-four feature buttons are displayed in two columns near the
right side of the screen. Some feature buttons are labeled with
feature names, and others are labeled with numbers.