Lucent Technologies DEFINITY User Manual page 55

Console Administration
To label the display buttons:
1. From the Button Identification area, click the button labeled Display.
n
n
Eight display buttons are displayed on the screen. Some display
buttons are labeled with names, and others are labeled with
numbers.
These buttons perform the same function as display buttons on a
non-PC based attendant console. They are used to access and
perform pre-determined functions. For example, the Next display
button cycles to the next entry in a displayed list.
If a button is labeled with a name, the button is " administered," and
may be used by the attendant. If a button is labeled with a number,
the button is not " administered." It performs no function within
PC Console and is not displayed to the attendant.
The Display Button Definition Table on the left side of the screen
allows you to identify the purpose, label, and relative location of
each display button that is administered for your system.
" Term" is a long description of the button' s function. It may be
up to 60 characters in length. This is the description that can
be displayed as a Help Tip when the user positions the cursor
over the button.
" Label" is the short description that will appear on the button
within the PC Console screens. It may be up to 8 characters in
length.
" Number" indicates where the button will reside within the two-
column table on the right side of the screen. The number 1
indicates the first position. The number 8 indicates the last
position.
The buttons that you administer, label, and position here will appear
on the Console Operations Display screen that is used by the
attendant.
Issue 2.5 October 1999
3-9