Controlled Restrictions - Lucent Technologies DEFINITY User Manual

Switch Features

Controlled Restrictions

This feature allows the attendant to activate or deactivate the following
restrictions for individual telephones or groups of telephones (on a COR basis):
n
n
n
n
These restrictions override restrictions assigned by the COR. Feature access
codes are assigned for individual and group restrictions. The attendant activates
the desired restriction by dialing the restriction activation code, followed by a 1
for outward, 2 for total, 3 for termination, or 4 for station-to-station; then dialing
the extension number to restrict one telephone or dialing the COR number to
restrict a group of telephones. Activation codes for telephones must be different
from the COR number.
Feature deactivation codes are also assigned. Deactivation procedures are the
same as the procedures for activation.
All telephones with the same COR are affected by a group restriction. For
example, if the attendant dials restriction activation code 2 (for total restriction),
and 12 (a COR number), this causes all telephones with COR 12 to be restricted
from placing or receiving calls.
To activate a restriction:
1. Click a Call icon
n
n
n
n
2. Dial the restriction activation code, followed by the restriction code
number (1 for outward, 2 for total, 3 for termination, or 4 for station-to-
station).
n
6-22
Issue 2.5 October 1999
Outward — The telephone(s) cannot be used for placing calls to
the public network. Such call attempts receive intercept treatment.
Total — The telephone(s) cannot be used for placing or receiving
calls. DID calls are routed to an attendant or a recorded
announcement (as specified for the system). All other calls receive
intercept treatment.
Station-to-Station — The telephone(s) cannot receive or place
station-to-station calls. Such call attempts receive intercept
treatment.
Termination — The telephone(s) cannot receive any calls.
Incoming calls are routed to the attendant, are redirected through
the Call Coverage feature, or receive intercept treatment.
, or highlight an empty call bar and press F6.
A Release icon
You hear the first dial tone.
The background of the call bar changes to white.
The call bar assigns a letter identification (such as c= ) to the call.
You hear the second dial tone.
is displayed on the call bar.