Lucent Technologies DEFINITY User Manual page 189

Troubleshooting
To busy verify a remote trunk in a DCS environment (two-button push
verification method):
1. Click the Busy Verify feature button.
n
2. Click a Call icon
n
n
n
n
3. Use your keyboard or the telephone keypad to dial the desired trunk
access code.
n
n
4. Click the Busy Verify feature button.
n
If confirmation tone is heard, this indicates an idle one-way
incoming trunk. Verification was successful. Click the Release
icon or press F8 to release from the call.
If ringback is heard, this indicates the trunk is an idle automatic
tie trunk or release link trunk. Verification was successful.
Click the Release icon
call.
If dial tone is heard, this indicates the trunk is idle and can be
used to place a test call. Verification was successful. Place a
test call, or click the Release icon
release from the call.
If the call is bridged onto an active call, and initial warning tone
was applied to the call, this indicates verification was
successful. Talk to the bridged parties, or click the Release
icon or press F8 to release from the call.
If reorder tone is heard, this indicates a trouble condition on the
trunk. Click the Release icon
from the call, then report the out-of-service condition to the
appropriate personnel.
The Busy Verify feature button is displayed in white.
, or highlight an empty call bar and press F6.
A Release icon
You hear dial tone.
The background of the call bar changes to white.
The call bar assigns a letter identification (such as c= ) to the call.
The call bar displays the number being dialed.
The number is dialed.
The Busy Verify feature button is displayed in white.
or press F8 to release from the
or press F8 to release
is displayed on the call bar.
Issue 2.5 October 1999 9
or press F8 to
-29