Lucent Technologies DEFINITY User Manual page 67

Console Administration
n
9. When you are finished making changes, click Save.
n
n
To delete a custom language:
1. Click the Custom Language folder.
n
2. Click on the down-arrow next to the Name of custom language box.
Select the custom language you want to delete.
3. Click the Delete button.
n
4. If you want to delete the language, click Yes.
n
To save the newly-translated term and its ALT- key sequence,
press ENTER.
The translation table is updated to reflect your change.
If the ALT- sequence that you assigned conflicts with any other
term, that term must be edited to change its ALT- sequence to
remove the conflict before PC Console will allow you to save
and use the finished custom language. Repeat Step 8 to edit
the ALT- sequence for this conflicting term.
NOTE:
If necessary, you can use the left and right arrow buttons near
the bottom of the screen to cycle through the windows and
make any final changes to this interface language.
If all required information has been provided, and no duplication
exists for the ALT- key-sequences, the screen will display a status
bar message indicating that the language has been saved, and can
now be accessed within the PC Console system.
If any information is missing from the defined terms, or if duplicates
exist within the ALT- key-sequence definitions, the screen will
instead display " Custom language will be incomplete." Before you
can use the new language, you must return to Step 4 and finish
defining its terms and ALT- key-sequence definitions.
The Custom Language tab is displayed.
A message box asks for confirmation that you want to delete this
language.
The language is deleted.
Issue 2.5 October 1999
3-21