Lucent Technologies DEFINITY User Manual page 140

Switch Features
In the following procedures, a number from 1 through 8 is used to specify the
routing plan; and a number from 1 through 7 is used to specify the day of the
week. The week begins with Sunday (represented by 1), and ends with Saturday
(represented by 7). Time is entered in military time; 0100 indicating 1:00 am,
and 2359 indicating one minute before midnight.
NOTE:
This option is available to PC Console only if it has been correctly
administered at the switch. Refer to your switch administration
documentation for the complete steps to correctly administer this option.
To activate Clocked Manual Override:
1. Click the Clocked Override feature button.
n
n
2. Use the keyboard or touch-tone buttons to enter (in the following
order):
The routing plan (1 though 8)
The activation day (1 through 7)
The activation time (0000 through 2359)
n
n
3. If you wish to enter a deactivation date, go to Step 4. Otherwise, skip
to Step 6.
6-44
Issue 2.5 October 1999
The Clocked Override feature button is displayed in white.
The display shows:
ENTER ACTIVATION ROUTE PLAN, DAY & TIME
NOTE:
If you enter any invalid information on the dial pad, the
Clocked Manual Override attempt will be denied and the
display will return to Normal mode. If this occurs, return to
Step 1 to try again.
The Clocked Override feature button remains white.
The display shows:
ROUTE PLAN: x FOR: ddd ACT-TIME: tt:tt
In the illustration above, " x" represents the routing plan number,
" ddd" represents a 3-letter day-of-the-week abbreviation, and " tt:tt"
represents the activation time.