Time - Teledyne VISION G2 CLASSIC 6 User Manual

Operation
Firmware Update
The firmware update feature is accessed by touching the
Update button at the bottom of the screen. The firmware update
feature allows an operator to update the firmware of the Vision
dissolution tester.
The firmware update feature uploads the file "timage.hru" from
the root of the USB flash drive. The firmware update process is
automated and takes up to 5 minutes to complete. Protocols,
system settings, security settings, and users are not overwritten
when a firmware update is performed.

Time

The time and alarm settings are accessed by touching the Time
button on the menu. The Edit Alarms screen appears. This
screen provides access to the alarms of the Vision tester and
setting the system time and date.
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019 64 of 158