The Display Layout - Agilent Technologies E4419B User Manual

The Display Layout

The following figure details the display layout when two measurement
windows are displayed, one analog and one digital. However, it is possible
using the
1 The status reporting line displays five fields, three associated with either
2 This field displays the channel setup being measured, either A, B, A/B, B/A,
E4419B Power Meter User's Guide
key to display just one measurement window.
15
1
2
3
4
5
6
GPIB, RS232, or RS422 status and two associated with error and warning
conditions. The first field displays either "RMT" (remote, GPIB, RS232, or
RS422 operation) or "LCL" (local, front panel operation).
For GPIB operation, the second field displays "TLK" if the power meter is
addressed to talk or "LSN" if it is addressed to listen. The third field
indicates an "SRQ" (service request).
For RS232 and RS422 operation, the second field displays "RX" when data
is being received. The third field displays "TX" when the power meter is
transmitting data.
The fourth field indicates "ERR" for any error conditions. The last field is
used to report error and warning messages.
A–B, or B–A.
14 13 12 11 10
Getting Started 1
9
8
7
7