Trigger:glitch Commands - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:TRIGger:GLITch Commands

Table 91 :TRIGger:GLITch Commands Summary
Command
:TRIGger:GLITch:GREat
erthan
<greater_than_time>[s
uffix] (see page
:TRIGger:GLITch:LESSt
han
<less_than_time>[suff
ix] (see page 610)
:TRIGger:GLITch:LEVel
<level> [<source>]
(see page 611)
:TRIGger:GLITch:POLar
ity <polarity> (see
page 612)
:TRIGger:GLITch:QUALi
fier <qualifier> (see
page 613)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Query
:TRIGger:GLITch:GREat
erthan? (see
page 609)
609)
:TRIGger:GLITch:LESSt
han? (see page
:TRIGger:GLITch:LEVel
? (see page
:TRIGger:GLITch:POLar
ity? (see page
:TRIGger:GLITch:QUALi
fier? (see page
Options and Query Returns
<greater_than_time> ::=
floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}
<less_than_time> ::=
610) floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}
For internal triggers, <level>
611) ::= .75 x full-scale voltage from
center screen in NR3 format.
For external triggers (DSO
models), <level> ::= ±(external
range setting) in NR3 format.
For digital channels (MSO
models), <level> ::= ±8 V.
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<polarity> ::= {POSitive |
612) NEGative}
<qualifier> ::= {GREaterthan |
613) LESSthan | RANGe}
29
:TRIGger Commands
607