Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 87

Table 17 :MEASure Commands Summary (continued)
Command
n/a
:MEASure:VAMPlitude
[<source>] (see
page 367)
:MEASure:VAVerage
[<interval>][,][<sour
ce>] (see page 368)
:MEASure:VBASe
[<source>] (see
page 369)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:TVALue?
<value>,
[<slope>]<occurrence>
[,<source>] (see
page 365)
:MEASure:VAMPlitude?
[<source>] (see
page 367)
:MEASure:VAVerage?
[<interval>][,][<sour
ce>] (see page 368)
:MEASure:VBASe?
[<source>] (see
page 369)
Commands Quick Reference
Options and Query Returns
<value> ::= voltage level that
the waveform must cross.
<slope> ::= direction of the
waveform when <value> is crossed.
<occurrence> ::= transitions
reported.
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= time in
seconds of specified voltage
crossing in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= the amplitude
of the selected waveform in volts
in NR3 format
<interval> ::= {CYCLe | DISPlay}
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= calculated
average voltage in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<base_voltage> ::= voltage at the
base of the selected waveform in
NR3 format
4
87