Trigger:level:asetup - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual
Oscilloscopes
Hide thumbs
Also See for InfiniiVision 2000 X-Series:
- User manual (296 pages) ,
- User manual (352 pages)
Table of Contents
Advertisement
29
:TRIGger Commands
:TRIGger:LEVel:ASETup
(see
page
790)
Command Syntax
:TRIGger:LEVel:ASETup
The :TRIGger:LEVel:ASETup command automatically sets the trigger levels
of all displayed analog channels to their waveforms' 50% values.
If AC coupling is used, the trigger levels are set to 0 V.
When High and Low (dual) trigger levels are used (as with Rise/Fall Time
and Runt triggers, for example), this command has no effect.
See Also
•
":TRIGger[:EDGE]:LEVel"
on page 603
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
595
Advertisement
Table of Contents
