:PRINt
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used.
See Also
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see
page
790)
| BMP | PNG | NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA"
on page 258
on page 150
on page 296
on page 299
on page 722
6
Root (:) Commands
175