Sbus<N>:Lin:source - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual
Oscilloscopes
Hide thumbs
Also See for InfiniiVision 2000 X-Series:
- User manual (296 pages) ,
- User manual (352 pages)
Table of Contents
Advertisement
25
:SBUS<n> Commands
:SBUS<n>:LIN:SOURce
Command Syntax
:SBUS<n>:LIN:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:LIN:SOURce command sets the source for the LIN signal.
Query Syntax
:SBUS<n>:LIN:SOURce?
The :SBUS<n>:LIN:SOURce? query returns the current source for the LIN
signal.
Return Format
<source><NL>
See Also
•
•
•
484
(see
page
790)
"Introduction to :TRIGger Commands"
":TRIGger:MODE"
on page 598
":SBUS<n>:LIN:TRIGger"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589
on page 487
Advertisement
Table of Contents
