System:protection:lock - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

27
:SYSTem Commands

:SYSTem:PROTection:LOCK

(see page 790)
Command Syntax
:SYSTem:PROTection:LOCK <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:PROTection:LOCK command disables the fifty ohm impedance
setting for all analog channels.
Query Syntax
:SYSTem:PROTection:LOCK?
The :SYSTem:PROTection:LOCK? query returns the analog channel
protection lock status.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
• "Introduction to :SYSTem Commands" on page 564
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 573