Mtest:data - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

21
:MTESt Commands

:MTESt:DATA

Command Syntax
:MTESt:DATA <mask>
<mask> ::= binary block data in IEEE 488.2 # format.
The :MTESt:DATA command loads a mask from binary block data. These
are the data bytes found in a *.msk file.
Query Syntax
:MTESt:DATA?
The :MTESt:DATA? query returns a mask in binary block data format. The
format for the data transmission is the # definite- length format defined in
the IEEE 488.2 specification.
Return Format
<mask><NL>
<mask> ::= binary block data in IEEE 488.2 # format
See Also
•
•
392
(see page 790)
":SAVE:MASK[:STARt]"
":RECall:MASK[:STARt]"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 435
on page 420