Hardcopy:network:password - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

17
:HARDcopy Commands

:HARDcopy:NETWork:PASSword

Command Syntax
:HARDcopy:NETWork:PASSword <password>
<password> ::= quoted ASCII string
The :HARDcopy:NETWork:PASSword command sets the password for the
specified Windows network domain and user name.
The password setting is a common setting for both network printer slots.
See Also •
•
•
•
•
•
306
(see page 790)
"Introduction to :HARDcopy Commands"
":HARDcopy:NETWork:USERname"
":HARDcopy:NETWork:DOMain"
":HARDcopy:NETWork:SLOT"
":HARDcopy:NETWork:APPLy"
":HARDcopy:NETWork:ADDRess"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 296
on page 308
on page 305
on page 307
on page 304
on page 303