24
:SAVE Commands
:SAVE:LISTer[:STARt]
Command Syntax
:SAVE:LISTer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:LISTer[:STARt] command saves the Lister display data to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".csv".
N O T E
See Also
•
•
•
434
(see
page
790)
"Introduction to :SAVE Commands"
":SAVE:FILename"
on page 428
Chapter
18, ":LISTer Commands," starting on page 313
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 426