Trigger:level:high - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

29
:TRIGger Commands

:TRIGger:LEVel:HIGH

Command Syntax
:TRIGger:LEVel:HIGH <level>, <source>
<level> ::= 0.75 x full-scale voltage from center screen in NR3 format
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:LEVel:HIGH command sets the high trigger voltage level
voltage for the specified source.
Query Syntax
:TRIGger:LEVel:HIGH? <source>
The :TRIGger:LEVel:HIGH? query returns the high trigger voltage level for
the specified source.
Return Format
<level><NL>
See Also •
•
•
596
(see page 790)
for internal triggers
"Introduction to :TRIGger Commands"
":TRIGger:LEVel:LOW"
":TRIGger[:EDGE]:SOURce"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589
on page 597
on page 606