Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 172

6
Root (:) Commands
Table 55 Overload Event Enable Register (OVL) (continued)
Bit
1
0
Query Syntax
:OVLenable?
The :OVLenable query returns the current enable mask value contained in
the Overload Event Enable Register.
Return Format
<enable_mask><NL>
<enable_mask> ::= integer in NR1 format.
See Also •
•
•
•
•
•
•
•
172
Description
Channel 2 OVL
Channel 1 OVL
"Introduction to Root (:) Commands"
":CHANnel<n>:PROTection"
":OPEE (Operation Status Enable Register)"
":OPERegister:CONDition (Operation Status Condition Register)"
page 167
":OPERegister[:EVENt] (Operation Status Event Register)"
":OVLRegister (Overload Event Register)"
"*STB (Read Status Byte)"
"*SRE (Service Request Enable)"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Enables:
Event when overload occurs on Channel 2 input.
Event when overload occurs on Channel 1 input.
on page 150
on page 232
on page 165
on page 173
on page 142
on page 140
on
on page 169