Visa Example In C - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

38
Programming Examples
End Sub

VISA Example in C#

To compile and run this example in Microsoft Visual Studio 2008:
1
2
3
4
5
6
For more information, see the tutorial on using VISA in Microsoft .NET in
the VISA Help that comes with Agilent IO Libraries Suite 15.
/*
* Agilent VISA Example in C#
* -------------------------------------------------------------------
* This program illustrates a few commonly used programming
* features of your Agilent oscilloscope.
* -------------------------------------------------------------------
*/
using System;
using System.IO;
852
Call viStatusDesc(session, err, strVisaErr)
MsgBox "*** VISA Error : " + strVisaErr, vbExclamation
' If the error is not a warning, close the session.
If err < VI_SUCCESS Then
If session <> 0 Then Call viClose(session)
End
End If
Open Visual Studio.
Create a new Visual C#, Windows, Console Application project.
Cut- and- paste the code that follows into the C# source file.
Edit the program to use the VISA address of your oscilloscope.
Add Agilent's VISA header file to your project:
a Right- click the project you wish to modify (not the solution) in the
Solution Explorer window of the Microsoft Visual Studio
environment.
Click Add and then click Add Existing Item...
b
c Navigate to the header file, visa32.cs (installed with Agilent IO
Libraries Suite and found in the Program Files\IVI Foundation\VISA\
WinNT\include directory), select it, but do not click the Open
button.
Click the down arrow to the right of the Add button, and choose Add
d
as Link.
You should now see the file underneath your project in the Solution
Explorer. It will have a little arrow icon in its lower left corner,
indicating that it is a link.
Build and run the program.
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide