Hardcopy:grayscale - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands

:HARDcopy:GRAYscale

Command Syntax
:HARDcopy:GRAYscale <gray>
<gray> ::= {{OFF | 0} | {ON | 1}}
The :HARDcopy:GRAYscale command controls whether grayscaling is
performed in the hardcopy dump.
The :HARDcopy:GRAYscale command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :HARDcopy:PALette command (see
(":HARDcopy:GRAYscale ON" is the same as ":HARDcopy:PALette GRAYscale" and
":HARDcopy:GRAYscale OFF" is the same as ":HARDcopy:PALette COLor".)
Query Syntax
:HARDcopy:GRAYscale?
The :HARDcopy:GRAYscale? query returns a flag indicating whether
grayscaling is performed in the hardcopy dump.
Return Format
<gray><NL>
<gray> ::= {0 | 1}
See Also •
722
(see page 790)
"Introduction to :HARDcopy Commands"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
page 309) instead.
on page 296