Sbus<N>:Spi:source:mosi - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

25
:SBUS<n> Commands
:SBUS<n>:SPI:SOURce:MOSI
Command Syntax
:SBUS<n>:SPI:SOURce:MOSI <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:MOSI command sets the source for the SPI
serial MOSI data.
You can also use the equivalent :SBUS<n>:SPI:SOURce:DATA command to
set the MOSI data source.
Query Syntax
:SBUS<n>:SPI:SOURce:MOSI?
The :SBUS<n>:SPI:SOURce:MOSI? query returns the current source for the
SPI serial MOSI data.
Return Format
<source><NL>
See Also
•
•
•
•
•
•
•
•
502
(see page 790)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:SOURce:MISO"
":SBUS<n>:SPI:SOURce:CLOCk"
":SBUS<n>:SPI:SOURce:FRAMe"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589
on page 501
on page 499
on page 500
on page 503
on page 505
on page 504
on page 506