Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 618

29
:TRIGger Commands
The optional <edge_source> and <edge> parameters should be sent together or not at all.
N O T E
The edge can be specified in the ASCII <string> parameter. If the edge source and edge
parameters are used, they take precedence.
You can only specify an edge on one channel. When an edge is specified,
the :TRIGger:PATTern:QUALifier does not apply.
Query Syntax
:TRIGger:PATTern?
The :TRIGger:PATTern? query returns the pattern string, edge source, and
edge.
Return Format
<string>,<edge_source>,<edge><NL>
See Also •
•
•
•
618
"Introduction to :TRIGger Commands"
":TRIGger:PATTern:FORMat"
":TRIGger:PATTern:QUALifier"
":TRIGger:MODE" on page 598
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 589
on page 619
on page 620