Calibrate:protected - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

9
:CALibrate Commands

:CALibrate:PROTected

Query Syntax
:CALibrate:PROTected?
The :CALibrate:PROTected? query returns the rear- panel calibration
protect (CAL PROTECT) button state. The value PROTected indicates
calibration is disabled, and UNPRotected indicates calibration is enabled.
Return Format
<switch><NL>
<switch> ::= {PROT | UNPR}
See Also
•
212
(see page 790)
"Introduction to :CALibrate Commands"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 207