Sbus<N>:Lin:standard - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:SBUS<n>:LIN:STANdard
Command Syntax
:SBUS<n>:LIN:STANdard <std>
<std> ::= {LIN13 | LIN20}
The :SBUS<n>:LIN:STANdard command sets the LIN standard in effect for
triggering and decoding to be LIN1.3 or LIN2.0.
Query Syntax
:SBUS<n>:LIN:STANdard?
The :SBUS<n>:LIN:STANdard? query returns the current LIN standard
setting.
Return Format
<std><NL>
<std> ::= {LIN13 | LIN20}
See Also
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 598
":SBUS<n>:LIN:SOURce"
on page 589
on page 484
25
:SBUS<n> Commands
485