Search:serial:can:pattern:data - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

26
:SEARch Commands

:SEARch:SERial:CAN:PATTern:DATA

Command Syntax
:SEARch:SERial:CAN:PATTern:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
The :SEARch:SERial:CAN:PATTern:DATA command specifies the data value
when searching for Data Frame ID and Data.
The length of the data value is specified using the
:SEARch:SERial:CAN:PATTern:DATA:LENGth command.
Query Syntax
:SEARch:SERial:CAN:PATTern:DATA?
The :SEARch:SERial:CAN:PATTern:DATA? query returns the current data
value setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
See Also •
•
•
538
(see page 790)
for hexadecimal
for hexadecimal
Chapter 26, ":SEARch Commands," starting on page 531
":SEARch:SERial:CAN:MODE"
":SEARch:SERial:CAN:PATTern:DATA:LENGth"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 537
on page 539