Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 313

Table 68 :LISTer Commands Summary
Command
n/a
:LISTer:DISPlay {{OFF
| 0} | {SBUS1 | ON |
1} | ALL} (see
page 315)
:LISTer:REFerence
<time_ref> (see
page 316)
Introduction to
The LISTer subsystem is used to turn on/off the serial decode Lister
:LISTer display and return data from the Lister display.
Commands
Agilent InfiniiVision 2000 X-Series Oscilloscopes
Programmer's Guide
18
:LISTer Commands
Query
:LISTer:DATA? (see
page 314)
:LISTer:DISPlay? (see
page 315)
:LISTer:REFerence?
(see page 316)
s1
Options and Query Returns
<binary_block> ::=
comma-separated data with
newlines at the end of each row
{OFF | SBUS1 | ALL}
<time_ref> ::= {TRIGger |
PREVious}
313