Mtest:amask:units - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:MTESt:AMASk:UNITs

Command Syntax
:MTESt:AMASk:UNITs <units>
<units> ::= {CURRent | DIVisions}
The :MTESt:AMASk:UNITs command alters the way the mask test
subsystem interprets the tolerance parameters for automasking as defined
by :MTESt:AMASk:XDELta and :MTESt:AMASk:YDELta commands.
• CURRent — the mask test subsystem uses the units as set by the
• DIVisions — the mask test subsystem uses the graticule as the
Query Syntax
:MTESt:AMASk:UNITs?
The :MTESt:AMASk:UNITs query returns the current measurement units
setting for the mask test automask feature.
Return Format
<units><NL>
<units> ::= {CURR | DIV}
See Also
•
•
•
•
•
•
Example Code •
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
:CHANnel<n>:UNITs command, usually time for X and voltage for Y.
measurement system, so tolerance settings are specified as parts of a
screen division. The mask test subsystem maintains separate XDELta
and YDELta settings for CURRent and DIVisions. Thus, XDELta and
YDELta are not converted to new values when the UNITs setting is
changed.
"Introduction to :MTESt Commands"
":MTESt:AMASk:XDELta"
":MTESt:AMASk:YDELta"
":CHANnel<n>:UNITs"
":MTESt:AMASk:SOURce"
":MTESt:SOURce" on page 409
"Example Code" on page 379
on page 379
on page 386
on page 387
on page 235
on page 384
21
:MTESt Commands
385