24 :Save Commands - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

24
:SAVE Commands
Table 74 :SAVE Commands Summary (continued)
Command
:SAVE:PWD <path_name>
(see page 437)
:SAVE:SETup[:STARt]
[<file_spec>] (see
page 438)
:SAVE:WAVeform[:STARt
] [<file_name>] (see
page 439)
:SAVE:WAVeform:FORMat
<format> (see
page 440)
:SAVE:WAVeform:LENGth
<length> (see
page 441)
:SAVE:WAVeform:LENGth
:MAX {{0 | OFF} | {1
| ON}} (see page
:SAVE:WAVeform:SEGMen
ted <option> (see
page 443)
:SAVE:WMEMory:SOURce
<source> (see
page 444)
:SAVE:WMEMory[:STARt]
[<file_name>] (see
page 445)
Introduction to The :SAVE subsystem provides commands to save oscilloscope setups,
:SAVE Commands screen images, and data.
:SAV is an acceptable short form for :SAVE.
426
Query
:SAVE:PWD? (see
page 437)
n/a
n/a
:SAVE:WAVeform:FORMat
? (see page
:SAVE:WAVeform:LENGth
? (see page
:SAVE:WAVeform:LENGth
:MAX? (see page
442)
:SAVE:WAVeform:SEGMen
ted? (see page
:SAVE:WMEMory:SOURce?
(see page 444)
n/a
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<path_name> ::= quoted ASCII
string
<file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-9; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<file_name> ::= quoted ASCII
string
<format> ::= {ASCiixy | CSV |
440) BINary | NONE}
<length> ::= 100 to max. length;
441) an integer in NR1 format
{0 | 1}
442)
<option> ::= {ALL | CURRent}
443)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
NOTE: Only ADD or SUBtract math
operations can be saved as
reference waveforms.
<return_value> ::= <source>
<file_name> ::= quoted ASCII
string
If extension included in file
name, it must be ".h5".